LumberJocks

Gauges in the Shop

  • Advertise with us
Blog series by Jim Jakosh updated 05-28-2019 01:05 PM 1 part 1331 reads 10 comments total

Part 1: Go - No Go gauge for Lathe Chuck

05-28-2019 01:05 PM by Jim Jakosh | 10 comments »

I use this gauge a lot so I thought I’d share it with fellow Lumberjocks that turn on the lathe. I was is Quality Assurance for most of my working life and we had many of these attribute gauges in the shop to quickly tell if something is within acceptable range . They were typically hardened a ground steel gauges but this one is plastic and replaced the wood one I used for years. I have watched a lot of demonstrators putting a tenon or a mortise on a piece before loading it into a chuc...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com