Jet Table Saw

  • Advertise with us
Blog series by Jim Jakosh updated 12-19-2009 03:29 AM 1 part 30678 reads 17 comments total

Part 1: Blade out of alignment on Jet JWTS-10JF 10" contractor saw

12-19-2009 03:29 AM by Jim Jakosh | 17 comments »

I stopped at a fellow LJ and she had a 10 Jet table saw with the blade out of alignment with the fence and table slots by 1/8”. The tilt mechanism went about 15 degrees and bound up tight too. I called Jet technical service (1-800-274-6846) and they were very helpful. They sent me an E mail note with instructions to align the blade. Initially when we talked, I thought I had to loosen the trunnion bolts to move the blade into alignment.The instruction said to get a flat 6×9R...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics