LumberJocks

Turning a Wooden Scoop

  • Advertise with us
Blog series by Jim Jakosh updated 06-27-2015 08:55 PM 1 part 4672 reads 25 comments total

Part 1: How I turn a sccop on the lathe

06-27-2015 08:55 PM by Jim Jakosh | 25 comments »

Candy, this blog’s for you!!!!!!!!!!!This is the process I use to turn a scoop from a wood blank on the lathe.I start by defining the volume needed in the the scoop. The formula is Pi x R squared x depth I planned on a 1/2 cup scoop and the volume of 4 oz is 7.218 cubic inches and I want the inside to be 2 5/8” So the formula is 3.1416 x ( 1.312) squared x depth = 7.218. The depth figures out to be 1.33” I start by drawing it out and then adding scrap wood in the area...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com