"Through Lay" #6: Final entry of "My Epoxy Experiment"
First let me apologize for not posting yesterday. I had a few thing come up & couldn’t get around to posting. Anyway here is the final post of this series before I post It as a completed project. I finished putting on the last coat of side two, with some added decorative glitter. It turned out pretty good. The last coat of epoxy on side two. I sanded side one again to remove some of the epoxy that seams to always run underneath after you pour. I used 400 grit to smooth all of the edges and the surface area that needed the most attention. When I was satisfied with the sanding I drilled a hole so there would be a place to run some string to hang it with. I used some glas...