Tablesaw build/refurb
Well, it’s been a while since I have done any serious woodwork (too long) but what I have done is complete a tablesaw build.Some of you may have seen the question I asked when I came across the oportunity to get a free table saw: http://lumberjocks.com/topics/41959Comments were varied, from don’t touch it to grab it while you can. Well here are the results. First job was to strip off the fairly flimsy frame and set about building a new one.The legs are fairly substantial 3”x3” The next task was to do something about the top. The existing one was far from flat and not very smooth. I made a top from a piece of 3/4” ply topped with a sheet of 1/8” md...
