LumberJocks

Jerry's Blog

  • Advertise with us
This blog is written by Jerry | 37 entries so far

Latest Entry

Build Blogs #3: Tortilla Press

04-22-2019 06:25 PM by Jerry | 10 comments »

THESE PICTURES ARE KINDA SMALL!! So if you want me to send you the plans and a sketchup model, PM me with your actual email address and I’ll send it to you. Bottom Plate – 10×10 x 3/4 – Spacers are 1×1 x 3/32 Top Plate – 9×10 – Cross Bar is 3/4×1/2×10 Handle is 10×2 21/32×3/4 – Start the arc for the handle 1” down from the top and end it right on top of the cross bar Fulcrum is 3×4 3/4×1 3/4 Use Piano hinge on the rear Steps: 1) Cut the top and bottom plates to size 2) Fabricate and glue the spacers to the top of the bottom plate 3) Fabricate and glue the crossbar to the top o...

Read this entry »

Older Entries

View all 37 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com