Shanem's Forum Topics

  • Advertise with us
View Shanem's:homeworkshopprojects (13)blog (1)reviews (0)forum topics (3)buddies (8)favorites (5)activity logWatch
07-10-2015 01:42 PM

Help with Drum Switch on Grizzly Shaper - 12 replies

So I bought a used 1 1/2 hp grizzly shaper. The previous owner upgraded to a 2hp leeson motor (110402). He attempted to wire the switch but it only works in reverse. I’m trying to wire it up for FW/Rev but the grizzly manual only has color codes and no T numbers. Also, there is no make or model on the drum switch. must be a Taiwanese one. ...

01-16-2015 06:04 PM

Built-ins for childs playroom - 3 replies

Trying to sketch up a design for a few built-ins for a playroom in the basement. This room also acts as a spare room for guest. It has a pullout couch currently. I want to build a bookshelf/bench along one way. The bench i’m going to take the mechanism out of the current couch and incorporate it. I have most of that figured out. I’m...

03-20-2013 04:50 PM

PC 4200 - Minimum Thickness Board - 2 replies

I’m in the process of building a dresser and at the stage of making the drawers. I bought some 6/4 poplar with the plan of jointing and then resawing to half inch. I had the blade set 90 to the table but what i didn’t know was the kreg jig wasn’t 90 and caused my boards to be 3/8” thick after planing. Does anyone see a...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics