Schatullmakaren's Workshop

  • Advertise with us
Workshop by Schatullmakaren posted 03-19-2016 11:55 AM 2508 reads 5 times favorited 10 comments Add to Favorites Watch

View all workshops »

View Schatullmakaren's profile


28 posts in 2081 days

click the pictures to enlarge them

Schatullmakaren's Workshop Schatullmakaren's Workshop Schatullmakaren's Workshop
Schatullmakaren's Workshop Schatullmakaren's Workshop Schatullmakaren's Workshop

click the marker to see the address


Here is my tiny workshop. With its 240 square foot, or approx 22 square meter, I guess it contends for one of the smalest here at Lumberjocks :) In some way I managed to squeeze in almost all machines that I need. There is always more to wish for but with this setup I can handle almost any kind of project. Building a kitchen or wardrobe system maybe should by a bit to demanding.

So, what have I squeezed in?

Table saw. Since I live in Sweden I haven’t come to a understanding why to use a American type of table saw. Why aint everyone going for a european type of sliding table saw? However I got a Hammer B3 Winner with micro adjustable fence. Supported by a 4 hp 400 V motor it handle any task with ease.

Planer/Jointer. I got the Hammer A3 31 with a spiral cutter block. It is actually possible to plain lumber perpendicular to the grain with this cutter head. It truly is amazing.

Band saw. For making my own veneer I use a Hammer N440 with 3,5 hp 400 V motor.

Handling sawdust. For me, dealing with sawdust have the highest priority. We woodworkers only get one pair of lungs and it would be said to stop doing woodworks because of health issues. Therefore I got a Felder AF 14 connected to a Super dust deputy from Oneida air. On the AF 14 I placed a huge M-class spunbond cartridge filter. The total area of this filter is almost 140 square foot! My shop vacuum cleaner is a GAS 35 M AFC Professional. Also this got a Oneida air product connected to it. Below the roof I mounted a jet AFS-1000B. Maybe a bit over dimensioned for my shop size …

I also got a Bag press, drill press, routers, orbit sanders and so on. If you have any questions about that place let me know.

This is all for now :)

-- Linus J. Schatullmakare, Sweden,

10 comments so far

View a1Jim's profile


118296 posts in 4857 days

#1 posted 03-19-2016 12:02 PM

Welcome to Ljs
That’s quite an amazing shop you’ve got ,a lot going on in there.


View Schatullmakaren's profile


28 posts in 2081 days

#2 posted 03-19-2016 01:14 PM

Thanks :)

Hopefully I will not spend that many years on this limited footprint. But for now it suits my needs perfect.

-- Linus J. Schatullmakare, Sweden,

View JoeinGa's profile


7741 posts in 3287 days

#3 posted 03-19-2016 04:57 PM

You know? I sometimes bitch to the wife that my shop is crowded and I wish I had a bigger shop. Then I see the fantastic projects some of you guys put out in shops barely bigger than a closet….

And I am truly humbled !

Thanks for sharing !

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View helluvawreck's profile


32122 posts in 4147 days

#4 posted 03-19-2016 05:28 PM

Linus, this is a very nice shop and it looks like you have some interesting things going on in there. Congratulations and welcome to Lumberjocks.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View pottz's profile


21241 posts in 2265 days

#5 posted 03-19-2016 06:02 PM

linus your shop may be small but your talent and abilities certainly arnt.youve done a great job maximizing what you have to the fullest.cant wait to see what comes out of their next.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View PAchemist's profile


57 posts in 2354 days

#6 posted 03-21-2016 03:02 PM

I agree with what everyone else is posting – The quality of work coming from a shop is not necessarily a function of its square footage. I’m especially envious of your tool chest on the wall.

View Monte Pittman's profile

Monte Pittman

30651 posts in 3618 days

#7 posted 03-21-2016 03:04 PM

Looking good sir.

Welcome to Lumberjocks

-- Nature created it, I just assemble it.

View magaoitin's profile


249 posts in 2230 days

#8 posted 03-23-2016 03:49 PM

I do love that style of table saw!
Your tables are beautiful and show just what you can do with limited space.. You definitely are doing the most with the least! Your website really shows off the finish on those tables. Mastercraft work sir!

-- Jeff ~ Tacoma Wa.

View bbain32's profile


43 posts in 2455 days

#9 posted 04-11-2016 03:02 PM

I have a shop the same size, 240sq ft. Although mine is a bit wider and not as long, so it makes it a bit easier to move things around.

Why don’t more people have a slider like your B3 winner? In Canada that saw brand new sells for $10000+ Canadian dollars. That is much much more than I have invested in every tool/machine in my workshop combined.

View JPJ's profile


821 posts in 3900 days

#10 posted 08-09-2016 04:50 AM

Nice Shop!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics