Easy Wood Tools / Midi Lathe Duplicator #3: Final Testing and Some Adjustments

  • Advertise with us
Blog entry by Sawdustonmyshoulder posted 02-20-2015 01:29 AM 13579 reads 3 times favorited 0 comments Add to Favorites Watch
« Part 2: Turned the Finials. Part 3 of Easy Wood Tools / Midi Lathe Duplicator series no next part

I found in my testing that I need to offset the EWT Finisher from the blank about 1/16 inch. I made a new ‘follower’ using a 1/2 inch washer. This washer offset the cutter all the way around.

Using the EWT Detailer that is set to cut equal to the pattern, I make the final pass on the finial.

Here are some images of the testing on a finial project.

Check out my blog on a great finishing helper using a DVD container.

I also have a project with a step by step of the turning process.

-- The more skilled you are at something, the worse you are at it when someone is watching.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics