Luberjosks the pipe five by five , S4S , cleared for landing............

  • Advertise with us
Blog entry by S4S posted 05-01-2014 09:35 AM 1964 reads 0 times favorited 7 comments Add to Favorites Watch

! I have been trying to calculate the degree of cut on the negative and positive angles . With his method , the inside of the dome would have no gaps . When two triangle sections are joined , they will be flush where they
join as well as outside and inside face . I am wondering if the red , yellow and blue struts all have different angles .
I guess somewhere in the 5 to 7 degree range . Of course he is not going to go into to great detail about those
angles because bottom line …he is selling plans . I am going to buy a set of his plans just to satisfy my
curiosity. I would like to build a 3V ,all wood , hub less , glue and screw, flush on the inside. dome . That is a nice
mock up that he is demonstrating with , and check out that pencil …,,,,, . Bucket list for the Dome build .


The cognitive distortions of this site, seem to me. to be on the rise . Surrealism and Virtual Reality ,
How are they similar , what are their differences . When you click the power to ’ OFF’ , poof !
everything vanishes . magic . I think I’ll go visit renners for awhile , he’s in another ‘virtual’ nearby .
I’m in the pipe five by five , signing off ,.... take care .


7 comments so far

View vonhagen's profile


547 posts in 2849 days

#1 posted 05-01-2014 12:19 PM

Houston we have a problem we can’t beam up scotty because he is in an angle warp 7 degrees 28 minutes 5 seconds north of pluto.

-- no matter what size job big or small do a job right or don't do it at all.

View Sodabowski's profile


2388 posts in 3317 days

#2 posted 05-01-2014 12:35 PM

Is that a planet anyway?

-- Thomas - there are no problems, there are only solutions.

View Porchfish's profile


851 posts in 3016 days

#3 posted 05-01-2014 12:35 PM

Just Like Me !

and thanks for the intro to Cee Lo Green (I’m a old man out inna woods doncha know) so thanks again to you

Just Like Me !

-- The pig caught under the fence is always the one doing all the squealing !

View Texcaster's profile


1286 posts in 2158 days

#4 posted 05-01-2014 03:23 PM

Always an interesting mix moment.

-- Mama calls me Texcaster but my real name is Mr. Earl.

View lanwater's profile


3113 posts in 3418 days

#5 posted 05-02-2014 04:31 AM

geodesic dome looks easier. Make in PVC (not wood?) and no negative angle.
I must have been asleep during geometry.

Love the music so much better than what was on the radio today. they are good for keeping awake while driving.

-- Abbas, Castro Valley, CA

View learnin2do's profile


891 posts in 3335 days

#6 posted 05-13-2014 02:15 AM

It looks like it involves a table saw. I wouldn’t mess with it. I bet your perfectionist self has figured it out already! If not, let go, and just mortise and tenon a big pile of crepe myrtle and glob it all together with lots of wood-dust filler.

-- ~christine @ used2btrees

View S4S's profile


2118 posts in 3165 days

#7 posted 05-14-2014 02:00 AM

Hi Christine , my , it’s been awhile . Thanks for dropping in . I don’t know about crepe myrtle ,
but there is a boat load of mesquite growing out back. You could probably make those into something better
than me , Bahaaaaaa, !

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics