LumberJocks

Charging Station #5: Makita charger mounting plates

  • Advertise with us
Blog entry by Ross Leidy posted 03-06-2021 04:53 PM 355 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 4: Drawer boxes Part 5 of Charging Station series Part 6: Carcass finishing »

I have two Makita chargers that I’ll mount on the side of the cabinet. The unfortunate thing about these chargers is that they have no hanger slots on the back. With some googling, I found some instructions on using the rubber feet like expansion nuts as a way to mount it. I’ll use that idea to attach the charger to a mounting plate, and the mounting plate will attach to the cabinet.

As it turned out, the feet positions weren’t exactly the same, but the difference was easily accommodated with an elongated slot for the screws so that one plate design would fit either charger.



1 comment so far

View mafe's profile

mafe

13102 posts in 4145 days


#1 posted 03-06-2021 06:21 PM

Great ide, I also have the Makita chargers and it has been a pain, that they don’t have any wall munt on the back.
Thanks,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com