LumberJocks

Jensen-style Z-Chair #24: Side structure - Final shaping and sanding

  • Advertise with us
Blog entry by Ross Leidy posted 07-03-2019 09:48 PM 431 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 23: Seat frame - maker's mark Part 24 of Jensen-style Z-Chair series Part 25: Seat frame - glue-up »

With the side pieces all glued-up, it was time for final shaping of the tips of the arms (I had left them long so I could clamp directly against the end), some blending of the underside of the front arm joint, and then sanding the side structures entirely. I kind of enjoyed the sanding for a while, but by the time I got down to 400 grit, I was ready for it to be over.



1 comment so far

View kaerlighedsbamsen's profile

kaerlighedsbamsen

1298 posts in 2134 days


#1 posted 07-04-2019 08:12 AM

Looking sharp. When studying a lot of mcm furniture I get the impression that the sanding must have taken 80% of the total production time

-- "Do or Do not. There is no try." - Yoda

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com