LumberJocks

Jensen-style Z-Chair #11: Sanity check

  • Advertise with us
Blog entry by Ross Leidy posted 05-28-2019 10:24 PM 347 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 10: Starting the arms Part 11 of Jensen-style Z-Chair series Part 12: Seat frame - slight adjustment »

I used a piece of scrap to confirm the bevel angles where the arm will join the rest of the side structure. There’s the computer model and then there’s reality, and sometimes they don’t align. Fortunately, this time they did.

For the long bevel in front, I rough-cut it on the bandsaw and use the disc sander to sneak up on the line.

I won’t cut the bevels on the arm pieces yet. I’ll do that after I get the top shaped. I did want to get the 1/2” dowel hole drilled in the end of the arm pieces while they were still square. I did not have a 1/2” spiral bit, but a regular straight plunge bit worked in a pinch. I carried the centerline marks down the 3 flat sides so that I can transfer the marks to the back stile once the bevel is cut.

The mating surface on the back stile can’t be positioned close enough for the router to reach in order to drill the other dowel hole, so this will be done on a drill press later.



1 comment so far

View mafe's profile

mafe

12069 posts in 3484 days


#1 posted 05-31-2019 12:55 PM

The coolest router jog to date.
Best thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com