Ross Leidy's Blog

  • Advertise with us
This blog is written by Ross Leidy | 92 entries so far

Latest Entry

Charging Station #8: Nearly done

03-09-2021 03:07 PM by Ross Leidy | 4 comments »

There’s just a few things left to finish-up and I’ll have a functional charging station. To install the tool hanger, I placed a 3” spacer between it and the top, and screwed the hanger in place through the pocket holes on the underside. I used some double-sided tape to hold the drawer fronts in place temporarily so I could install screws from inside the drawer box. To prevent the drills and drivers from tearing-up the back of the case, I cut a strip of rubber floor mat and wedged it in place at the top. All that remains is to attach the chargers, but I’m re-thinking my approach there. And then to figure out just where to hang it...

Read this entry »

Older Entries

View all 92 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics