RoadHogg's Blog

  • Advertise with us
This blog is written by RoadHogg | 27 entries so far

Latest Entry

Beehive Handhold Cutting Jig #3: Dado Blade it is!

02-09-2015 01:11 AM by RoadHogg | 3 comments »

The shaper cutter was just not working out. The biggest issue was that is was just not big enough in diameter and therefore it wouldn’t go deep enough into the box side. So I checked things out with the dado blade in the SawStop. That worked 99% perfectly. I wish I’d have stuck with plan A to start with. The only issue is that yes, the dado blade “bottoms out” on the box side once the cut gets deeper than the height of the teeth. I can manage by making one revolution on the blade height and making two passes. I’ll actually be making three passes so I can get a slightly wider hand-hold scallop. Here’s the base of the jig. It just clamps to the...

Read this entry »

Older Entries

View all 27 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics