Ripthorn's Blog

  • Advertise with us
This blog is written by Ripthorn | 21 entries so far

Latest Entry

Let's Build an Infill the Easy Way! #2: It's Cleaning Up Nice

04-22-2016 01:34 AM by Ripthorn | 6 comments »

I don’t have a ton of pictures for this entry, as I got a little carried away on the tasks I was doing. I looked at it and decided that the bun placement could go one of two ways: or I got finish on the tote and bun. I decided that for now I won’t make a decision on bun placement, though I am leaning towards the more forward position because it allows for better hand grip on the bun and more room for chip ejection. The only con is that it looks a little funnier. Oh well. After 4 coats of Formby’s low gloss tung oil finish, I did a coat of paste wax. I’ll do one more before I call it good. I apply the paste wax with gray scotch-brite, as it help...

Read this entry »

Older Entries

View all 21 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics