LumberJocks

RickDel's Forum Topics

  • Advertise with us
View RickDel's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (8)buddies (0)favorites (0)activity logWatch
06-23-2020 03:53 AM

Need help storing 4x8 sheet lumber in a tight garage. - 23 replies

Hello, I have VERY, VERY limited space in my 2 car garage. I have all my plywood and mdf 4×8 sheets leaning against a metal shelf. I need to make a change so I can access the items on the shelf (if I remove anything from the shelf now the weight of the sheets will knock my shelf over). I really can’t move the sheets anywhere else...

04-05-2020 07:20 PM

2" dado on table saw - 12 replies

Hello, I’m a beginner level woodworker and I want to make a torsion box out of 4” MDF. I’ll be making the lap cuts with an 8” dado blade on the TS. I know making dados and rabbets with a router is normally done with multiple passes, but is that the same with a TS and dado blade? Or do I just cut the entire 2” ...

04-03-2020 02:50 AM

Need advice making CNC enclosure. Please! - 33 replies

Hello, I bought a Shapeoko XXL last month but have been struggling to figure out how to build an enclosure for it. I don’t have any experience building cabinets, cabinet doors, or installing drawers so this is a big venture. I do have a good selection of tools that I feel pretty comfortable using. Though, my only real experience is bu...

02-20-2020 05:26 AM

How do I make this? A three piece corbel painted on the outside and stained on the inside. - 14 replies

Hello, I’m looking for advice on finishing some corbels like the ones pictured below. I know I can’t glue painted or stained wood, so how do I complete this? What’s the steps? Thanks

02-07-2020 07:05 PM

Need advice on making this pattern into a template - 17 replies

Hello, I’m new to woodworking and I want to made some shelf corbels. I drew a pattern but looking for advice on making them. Here’s the pattern: My plan is, on a thin piece of hardboard, to cut the outside with a bandsaw and the inside with a scroll saw. If that’s correct, he’s my two questions: 1. What do ...

12-30-2019 12:49 AM

How to cut a groove or dado into the edge of 2x for floating shelf bracket? - 10 replies

Hello, I want to install some floating shelf brackets using premade welded brackets. The place I’m buying from, Sheppard Brackets, sells steal templates for a reasonable price but I’m wondering if I can make a jig or maybe there’s another method to use. Can you guys offer any suggestions? I’m a beginner skill leve...

01-27-2019 07:24 PM

Need Help... How to deal with this trim issue (trim reveal / trim proud) - 15 replies

I hope I put this in the right forum. Hello, I’m a beginner woodworker who building a window cornice box similar to this: However, I want to use corner trim in my build. My problem is the corner trim is proud of the bottom trim it butts into by about a 1/16th of a inch”. Here’s a couple scrap pieces to see what I’...

12-18-2018 03:54 AM

Should I spackle this gap between wood and trim? - 19 replies

Hello, I’m new to woodworking and recently built a couple small shelves. I made a mistake and sanded the edge of the piece of wood next to my crown trim and now there’s a gap. Should I spackle the gap or just leave it? I’m painting this project with latex paint. Thanks – Rick


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com