RetiredCoastie's Blog

  • Advertise with us
This blog is written by RetiredCoastie | 2 entries so far

Latest Entry

My attempt at a 3D cutting #1: 3D Cutting Board Inspired by SPALM!

01-13-2012 11:14 PM by RetiredCoastie | 22 comments »

Quite awhile ago SPALM posted his project for a 3D cutting board: the more I followed his progress the more I wanted to build one myself and thanks to SPALM’s ripping jig and his idea I began building. Along the way I found myself in need of various clamping jigs that would make this project as easy and as accurate as possible. The journey begins:I built the ripping jig that Spalm built and ripped my stock with the blade set at 30 deg. using scrap stock and creeping up on the width until I had tight joints in the center of the triangle as SPALM recommends. Once I had the ripping sled adjusted I cut the strips: Once I had r...

Read this entry »

Older Entries

  • Shop makeover - 12-11-2010 04:08 AM | 16 comments

    I haven’t been around much over the past year due to a shop rebuild and a change in my work...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics