LumberJocks

RenB's Blog

  • Advertise with us
This blog is written by RenB | 3 entries so far

Latest Entry

Crib #3: Completing the headboard

03-23-2018 12:40 AM by RenB | 1 comment »

At this point I have all the arches cut out except for the small molding piece. Now I just need to cut their length down and add the chamfer in the larger molding I used the router table to cut the chamfer on the large molding. I did shallow passes and used wooden screw clamps to increase the base of the arch and keep it from tipping, seeing as the base was getting narrower with each pass. I then started laying out the pieces together to find the exact length of the arches. I used my domino to temporarily attach the main pieces of the back and then I clamped the arches together making sure that they were centered. That way the seams look nice and symmetrical. After gett...

Read this entry »

Older Entries

  • Crib #2: Building Curves - 01-23-2018 11:49 PM | 0 comments

    Looking at my Sketchup model the thing I think would be the biggest problem is the arches on the ...

  • Crib #1: Design - 01-21-2018 06:21 AM | 1 comment

    All right please bear with me, this is my first Blog entry on any topic. The wife and I are ex...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com