Redoak49's Forum Topics

  • Advertise with us
View Redoak49's:homeworkshopprojects (43)blog (14)reviews (7)forum topics (86)buddies (10)favorites (230)activity logWatch
03-07-2016 07:07 PM

Oneida Smart Dust Collector - 2 replies

I am looking for a new dust collector and have been reviewing 3 hp cyclones. One that is I find interesting is the Oneida Smart Dust Collectors. My understanding is that the motor is variable speed and adjusts itself so that it creates more suction (static pressure) at lower cfm. This means greater suction if you are using a 2.5” dus...

02-18-2016 03:42 PM

Dewalt Radial Arm Saw - 925 - 4 replies

My father bought this radial arm saw about 1960-1962. I am trying to figure out if I want to have it in my shop. It is a great saw and very solid. I have a miter saw, table saw and band saws in my shop. The saw is in great condition. The picture I am posting is of another one just like it that I found online. It has sentimental value but...

12-21-2015 12:33 PM

Mr . Gates 11 Rules - 16 replies

With all the idiots complaining about wanting a safe place and their mommy on college campus, I found the following rules would be good for them. Also, good rules for all young people who feel entitled. I have worked many different job before getting a degree. The most dirty difficult one was flipping burgers. I worked in a large cafeteria B...

10-13-2015 02:28 PM

The Martian Movie - 3 replies

I saw the movie The Martian yesterday and really like it. I had read the book and loved it. The movie followed the book really well. The special effects were great and there were some really funny dialog. Has anyone else seen this movie. On second thought, I wonder if the people on this forum go to movies and which recent ones you liked....

09-09-2015 01:56 PM

Magnets for Box Lid Latch - 3 replies

I am making some small boxes (3” x3” x 5”) out of 3/8” material. I have seen several boxes which have used small magnets to hold the box closed. What sized magnets have people used for doing this? When I look up small disk magnets, one comes up with a lot of choices for strength, coating and size. Before I buy some,...

09-02-2015 06:14 PM

Monarch Butterflies - 3 replies

Besides woodworking, I enjoy working in the yard and have grown flower beds to attract Hummingbirds and Monarch Butterflies. We have planted Milkweed in several places and protected it from cutting or spraying as it is the only plant that Monarchs eat and lay eggs. This is one plant that we had which was being eaten by the Monarch larva. ...

08-29-2015 10:14 PM

What Glue for Veneer - 8 replies

I want to glue some small plywood pieces (6” x 8”) to use for a box top. What type of glue can I use? I plan on using veneer on both sides of the plywood and would use either 1/8” or 1/4” Baltic Birch.

08-21-2015 11:37 AM

What is it Posts...No Words Just Links - 9 replies

One of the things I struggle with are posts that are simply links to another site such as YouTube or Facebook. I looked at a post today where the title said nothing about the project and contained a link to another site. It turns out there was a picture of a very nice project. I really enjoy a good project post with pictures and a descripti...

04-28-2015 12:27 AM

Big Burl - 2 replies

While going through some old Photos, I found this picture of the biggest burl that I have seen. I am certain that there are many larger but this one was over 6 feet across. It had been cut down and placed on a concrete pad and securely chained down.

04-17-2015 11:51 AM

Katana Router Bits - 4 replies

I need a lock miter bit and was looking at prices. I normally use Freud or Whiteside bit but am looking at the MLCS Katana bit as it is lower cost. Does anyone have experience with the Katana bits and what do you think?

03-11-2015 02:52 PM

Dust Collection Blast Gates.....Plans....Help - 2 replies

I am in the process of updating the dust collection piping in my shop and need blast gates. I have some cheap plastic ones that get dust in them and also rattle. I probably need at least 6 of them. The good aluminium ones are about $ 12-15 a piece and I think that I want to build my own. I have looked at lots of videos, project, and blog...

03-10-2015 01:37 AM

Wahoo Woodworking???? - 12 replies

I made an early post about the stools and cutting boards that were posted. I did not get many responses so I will try again. I emailed Mr Herrera at Wahoo High school in Wahoo , Nebraska. He teaches a woodworking class and has his students post their projects.. there are not very many comments and views on them. In this day and age where ...

03-09-2015 04:13 PM

Step Stools and Cutting Boards - 1 reply

We have another wave of projects like the step stools and this time it is cutting boards. I think these are coming from a school shop class and I am happy to see shop being taught in a school. It is great to see the projects posted. I would really like to see some information about the school and shop class.

02-27-2015 09:13 PM

Live Long and Prosper - 8 replies

I am saddened by the death today of Leonard Nimoy. I loved him as Spock and saw him on stage as Sherlock Holmes. He did a lot in his career and I will miss him.

02-27-2015 12:26 PM

WeatherTech Floor Liners - 4 replies

I am looking at getting a new car and thinking about buying the WeatherTech floor liners. They look like they would do a really good job of keeping the snow and water off the floor. I would like to hear from anyone who has actual experience with them and how they like them.

02-22-2015 03:06 PM

Oak Pegboard - 7 replies

My wife wants a pegboard in her sewing room. All of the cabinets and trim are oak and of course wants oak pegboard. I searched online and could not find anything. Had anyone seen such a thing. I could use oak plywood with oak trim and drill a zillion holes with a router and jig. I probably would make oak pegs instead of metal ones. A...

01-01-2015 06:25 PM

Replacement Drill Press Chuck - 1 reply

I have the Jet 16-1/2” drill press and not happy with the chuck. It. Is a 5/8” with a #2 MT. The chuck is good except it is hard to turn and adjust the size. I have issues with my wrists with arthritis and had surgery on one wrist. The chuck just takes a lot of effort to adjust and hard on me. I have cleaned it and use some lig...

12-10-2014 03:44 PM

Thermal Treatment of Wood - 3 replies

I got a plan for a toy dump truck and it showed using thermally treated or heat treated wood. If done right, it can darken a wood anywhere from a light caramel to almost a dark brown. Has anyone have any experience either heat treating wood or working with heat treated wood. I read some articles about the commercial heat treatment and the...

10-22-2014 03:58 PM

Small Band Saw Blades - 3 replies

I finally decided to add a small 10” band saw to my shop to go with the 16” Band saw. I intend to use the small band saw to make toys and other small things and not to do any re-saw work. I looked online for some blades in the 3/16”, 1/4” and 3/8” sizes with a length of 70-1/2” and there are some brands ...

10-20-2014 01:12 PM

Same Tool but different Paint ?? - 1 reply

I have been looking at different small 10” band saws and notice that the Jet 10” and Masterforce 10” are identical except for different paint and brand. The same goes for the Rikon 10” and the Craftsman 10” We all know that this happens with a lot of the tools. The one that comes to mind the most is the 15̶...

« prev 1 2 3 4 5 next »
86 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics