LumberJocks

Redoak49's Favorites

  • Advertise with us
View ruddy's profile

Inlaid Wooden Hinges #1: Getting started

05-08-2012 08:48 AM by ruddy | 4 comments »

I had a few of the boxmakers asking for a tutorial blog on the method I have used to make inlaid hinges. This is a first for me so be gentle, pull up a chair and get a coffee. And ask any questions…....I like to make boxes and have done a few with conventional wooden hinges but I thought they were more suited for rustic designs when virtually added to the box as the last sequence when making the box. I played around with a few designs of flush mounted hinges and came up with the concept...

Read this entry »


View teetomterrific's profile

Shop Tool Projects #1: A Router Table with Rack and Pinion Linear Motion DRO Fence

02-01-2020 03:47 PM by teetomterrific | 16 comments »

It has been almost a year since I completed this shop tool build project so I’ve had some time to put this router table with rack and pinion linear motion DRO fence to use since I originally documented this build for posterity. It has worked out great in my shop and I’d have a tough time going backward and using my old router table now that I have this one. Teaser Video: https://www.youtube.com/watch?v=Se2wNlpWX3I ————————̵...

Read this entry »


View MrLaughingbrook's profile

Wood hinges, Incra HingeCrafter

04-17-2018 12:11 AM by MrLaughingbrook | 4 comments »

I bought the HingeCrafter and did one practice set of hinges following the directions as closely as possible. All seemed to go well and indicate I could get better with practice. So, when I decided on wood hinges for my current project then I thought I’d make a wood hinge inventory using current project stock plus some exotics scraps to improve my skills and not have to relearn and practice with the jig for a while. 3/8 inch hinges. A few comments may help someone on a similar eff...

Read this entry »


View Dutchy's profile

TIPS #5: Making classic car fenders

03-17-2018 10:01 PM by Dutchy | 4 comments »

Below pictures from making classic fenders. 6 11

Read this entry »


View Dutchy's profile

TIPS #3: Making kerfs, method 2

01-03-2018 06:26 PM by Dutchy | 4 comments »

For a long time I’m still like making wooden “toys”, but making a blog from every build can be boring. Not only for you but also for myself. Then I got the idea to make a TIP contribution of something that can be interesting for others. I have been influenced for a large part by others. So dont be surprised if you see what others have invented long ago. But if I know who invented it, I will mention it..This is the second description of kerf making. Soon I will describe another. ...

Read this entry »


View LittleBlackDuck's profile

Model vehicles' kerf making.

12-31-2017 03:35 AM by LittleBlackDuck | 34 comments »

Gents, Ladies, Boys, girls, Jocks and Jockettes…. Someone asked how the door kerfs were made in models, Well there are many more different methods then there are hairs on my well adorned head. Nevertheless I thought I’d pluck out a hair and say a few words on how I kerf. Now contrary to my common practice, I’m warning you up front about reading all, in case you are not interested. For my solution, I employ the use of SketchUp, a laser cutter (can be substituted by C...

Read this entry »


View htl's profile

32 Ford working on the spoke wheels

07-26-2019 11:08 PM by htl | 11 comments »

Before I glue up the wheel wells I figured it would be a good idea to have the wheels so every thing lines up just right, so it’s wheel making time again. Here is where I got all my info for making spoke wheels, I do it a little different but this will give you all the info needed, I watched it 10 or more times before it all started to come together. There’s a hundred ways to do any thing but here’s what’s working for me right now for building spoke wheels. Dr...

Read this entry »


View htl's profile

Wooden Models #54: Sanding wheels then back to the car building

05-21-2016 02:55 AM by htl | 8 comments »

I started sanding the wheels with the sander then it hit me this is going way to slow, so the shop smith to the rescue. I would have been sanding for hours but with the ss or any drill press I had them sanded and perfect in an hour, and since it was so easy I took more time with them to get out all the sanding marks. I routed around the rim of the test tire and rim and stained it just to get a look see and didn’t really like the look, but went back and stained the whole ti...

Read this entry »


View htl's profile

Wooden Models #52: 32 Lincoln Kb 2.5 Spent the day making A wheel.

05-16-2016 10:59 PM by htl | 15 comments »

The lincoln Kb needs some wheels and not just any wheels but the stock wheels that come with it when new.Something like this 1932 Lincoln KB Roadster.But I don’t know about them white walls. LOL Can it be done well I did it once took me all day hope I can get better on my next 7 tries. But first need to catch up on how the cars coming along. [What was done Saturday]Now hardly any thing is glued up, there are quite a few part that need gluing then shaping and then add another part ...

Read this entry »


View Jason1974's profile

Model Build #2 : The Hummer #4: Side & Back Panels

04-12-2019 11:24 AM by Jason1974 | 10 comments »

Here’s another update for you guys. I used a 1/16” straight router bit for the kerfs and I made a template for making the kerfs for the doors and windows. I am going to put the gas cap in a different location. I want my model to have different features than T&J’s.........................Thanks for watching!

Read this entry »


1 2 3 4 ... 6 next »
51 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com