Raymond's Forum Topics

  • Advertise with us
View Raymond's:homeworkshopprojects (33)blog (5)reviews (25)forum topics (43)buddies (29)favorites (0)activity logWatch
08-22-2019 03:25 PM

Manual For Masterforce Planer 240-0045 - 8 replies

I’m looking for a manual for a Masterforce Planer 240-0045 13” planer. Picked it up for 50.00 works well just would like a manual. Ray

07-13-2014 02:40 PM

Re Building Ridgid Batteries - 1 reply

Ever had a battery go bad? I had two Ridgid batteries go bad. They were not part of the life time guarantee so I had nothing to loose. I was at Menards the other day and they had Tool Shop 18 volt Lio Ion batteries on sale for 14.99 each. I picked up to. The pack is very similar to the Ridgid Pack. When I opened the Tool Shop Packs I found...

12-05-2012 09:55 PM

Tool Gloat or an offer I could not refuse - 18 replies

Well I have a Tool Gloat to share. We recently had some work done on our house and the contractor saw my shop and expressed to me that he had a Ridgid TS 3650 Cast Iron table top he wanted to sell. He wanted 300.00 I figured not to bad at Home Depot they are around 499.99. Well I took some time to think about it and a week later he called and s...

09-24-2012 12:19 AM

What is your choice in Wood Glue - 19 replies

Just thought I’d ask around what people are using for wood glue. Elmers Carpenter Glue is my glue of choice. What about you?

05-04-2012 01:45 AM

Have you ever shot anything with an Air Nailer? - 34 replies

Had a bee in the shop today. Reached for the fly swatter but it was no where to be found. So I improvised and shot the bee down with my 23 guage airnailer. It was a lucky shot. The bee crashed onto a log I had for a turning I was going to do. The bee tried to fly but was harpooned. I finished him off with a couple more nails. Anyone else shoot ...

02-26-2012 03:58 AM

Music in the shop - 65 replies

What do you listen to in your shop. I listen to Christian music, right now it’s Robin Mark, here is a sample I know he is watching over me, I still have all my fingers.

10-03-2011 03:02 AM

Woodcraft Store - 24 replies

I am eating some humble pie. Awhile back I wrote something on here to the efect that it was expensive shoping at Woodcraft. I take that all back. They were there and had what I need when my regular favorite store did not have what I wanted. I am now a dedicated Woodcraft fan. I will still shop around but my first stop will always be Woodcraft. &...

07-01-2011 09:23 PM

Harbor Freight Testing Facility - 8 replies

I came accorss this article today on Harbor Freights Testing Facility. Thought others might injoy reading it.

07-01-2011 06:03 PM

Phillips, Square Drive Slotted. What is the best? - 31 replies

What are your thoughts on various types of screws. I personall like #2 square drive. Lots of torque, easy in and easy out. What are your thoughts.

06-28-2011 05:15 AM

Project holder - 3 replies

I needed something to hold a project in different positions while I worked on it. This is what I came up with. Its small work mate from Wolfcraft 7.99 at Menards. It consists of two pieces of partical board with a melimine surface, and a piano hinge. I drilled a hole in the center of both pieces and epoxied in a 3/8 nut, I made a handle and ...

06-13-2011 11:10 PM

Going to Harbor Freight Tomorrow - 59 replies

I’m going to Harbor Freight tomorrow anyone need anything? Any jems that I should be looking for? I going to get a few air tools. I know what people will say but I have had good luck. I also need sanding disks and other supplies.

03-21-2011 07:36 PM

Wood Craft Store - 40 replies

Is it just me or are Wood Craft Stors a little pricy. I was in one in Appelton WI the other day and did not spend any money. Not that I could find things to purchase. I just could not justify the price. Am I cheep or are they expensive?

03-17-2011 06:37 PM

Out of Print Books - 6 replies

If a book is out of print and not available. Is is ok to download a PDF version from someone on the internent. What are you thoughts on this.

03-11-2011 07:59 PM

Earth Quake and Hugh Wave - 0 replies

My thought and prays for our Lumberjocks friends and all those near and far that are effected by this disaster. One can’t help but ask are we heading towards something. Events like Libya, Egypt, Saudi Arabia, and now Japan. I believe we are heading to the second comming. I believe the time is near. Everyone is in my thoughts and prayers.

02-16-2011 05:35 PM

Books - 3 replies

I am looking for a couple of books. Making Wooden Mechanical Models by Allan Bridgewater and Making More Wooden Mechanical Models again by Allan Bridgewater. Both appear to be out of print. If anyone has a copy or knows were one an get one, in print or electronically (PDF) please let me now. Thanks

01-24-2011 07:49 PM

Blade Runner Saw - 5 replies

Anyone got one of these, they are new at Menards. Made by Rockwell, yet I can’t get to Rockwells web site. I’m going to Menards to have a look at it.

01-21-2011 05:38 PM

End Grain sealing - 16 replies

I hate end grain. What is your best way of sealing an end grain prior to applying a finish. I have some cedar that is sucking up finish like a sponge.

01-11-2011 05:39 PM

Native woods in your area - 30 replies

What interesting local woods are in your area? I was going to post the list for Wisconsin, however it is way to long. What are some local woods you work with? I use Tamerack, very very hard and grows everywhere. Also Black Walnut, and soft maple. All three as well as pine and alder grow on my property. So what local woods do you use?

01-05-2011 07:24 PM

Plans Forum - 22 replies

Has there been any talk about a fourm were members could post plans for projects?

01-03-2011 11:53 PM

Need new insert for my HF 14" Bandsaw - 6 replies

I need to make a new insert for the table on my HF 14” bandsaw.Any suggestions on material. I was thinking Nylon, but I am open to suggestions.

1 2 3 next »
43 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics