Router Table

  • Advertise with us
Blog series by RaggedKerf updated 08-16-2013 11:54 PM 2 parts 2880 reads 0 comments total

Part 1: The Scrap Pile Got a Little Smaller...

08-16-2013 11:50 PM by RaggedKerf | 0 comments »

As I contemplated working on Kylie’s Castle Bookcase, I realized that my plan for custom trim around the bottom and top would need the services of a router. I figured it would be easier to use a router table rather than clamp a 1×4 piece of wood to the bench and rout it by hand. To this end, I turned to the router table that my father in law gave me, but soon realized that the table was too small. It would be just fine for smaller parts, lighter work and such. But handling p...

Read this entry »

Part 2: The Fence

08-16-2013 11:54 PM by RaggedKerf | 0 comments »

Took advantage of some quiet time after the kiddos went down tonight to make up some time on another secret project. Finishing the router table was key to that project and can also be really useful on the Castle Bookcase so….it got bumped to priority #1. That meant tackling the fence. Luckily, my son’s bedframe broke about four months ago. I repaired the nice wood frame and rail and kept it in the lumber pile until today, knowing from the get go what it was to be used for. I...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics