LumberJocks

RCT's Favorites

  • Advertise with us
View shipwright's profile

Workbench Challenge #1: Best bang for the buck

11-19-2013 08:38 PM by shipwright | 36 comments »

I have just arrived back in Az for the winter and have decided I need a good workbench. The one I have at home in Canada is great but it’s too big for my little carport shop here so I have redesigned it a little and am going to take it on as a challenge to build the”best bang for the buck”workbench. It is really a challenge for myself but if anyone wants to take it up and give me a run for it you are absolutely welcome. With luck the outcome will be a cheap, easy to build...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 97 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View  woodshaver Tony C   's profile

You've got to see this mirror finish on soft pine!!!

09-08-2012 10:24 PM by woodshaver Tony C | 34 comments »

I was putting a finish on a headboard I was working on and just out of the blue I thought what if I rubbed some Salad bowl finish (bees wax and mineral oil) on some raw sanded pine and then let it dry and spray it with lacquer. My common sense told me the lacquer would fish eye or bead up and it was a dumb idea. I always use sanding sealer under Lacquer! Well I did it anyway just to see what would happen! I did all this by hand…..no power buffing at all. I sanded to 400, stained ...

Read this entry »


View shipwright's profile

V8 Degree wedge powered workbench #1: Some Features and Operational Videos.

08-31-2012 08:56 PM by shipwright | 25 comments »

While this is the beginning of my construction blog for the V8 Degree bench, I’m not actually going to get into the build just yet. There are a few more features that I didn’t want to clutter the project post with and I’ve added a couple of demo videos on the vices. I thought it would be best to start with a full view of the bench and its operational features first and get into the construction process in the next segment. This photo shows the dog hole inserts that hide a...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com