Hello all and thanks for the welcomes! I joined "LumberJocks" in hopes of getting some help with the Grizzly G1026 3HP Shaper I picked up used for $250. The main switch as well as the reversing switch were both smashed. The reversing switch wires inside the cover were bypassing the switch all together. The shaper only ran in one direction. I replaced both switches and am now in the process of wiring the motor and switches together. Yes, I have the Grizzly manual. I'm still confused. The machine is from 1990. I was wondering if anyone else had a picture of the wire hookups under the motor cover as well as the reversing switch. Any help would be great. Thanks