LumberJocks

Hydraulic Crane continued

  • Advertise with us
Blog series by Pjonesy updated 06-30-2016 03:35 AM 1 part 1470 reads 3 comments total

Part 1: The boom

06-30-2016 03:35 AM by Pjonesy | 3 comments »

After a little advice from Bruce #4 I am hoping that this series on the Hydraulic Crane becomes a bit easier to follow.First up is a little tip on how to make the hydraulic ram parts work a little better. If you ever get a set of verniers out and measure dowels etc you will find that not many are very accurately produced and therefore when you bore a 5/16 hole for a 5/16 dowel it doesn’t always slide in smoothly. I usually end up boring the hole 1/64 oversize and then fitting a reasonab...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com