LumberJocks

Picho's Favorites

  • Advertise with us
View Paul Stoops's profile

Decked Out Ridgid Model R4511 Table Saw #1: Introduction and Background

12-24-2011 04:56 AM by Paul Stoops | 6 comments »

After moving into a different house with a very small shop, I had to leave behind my beloved General Model 350 3HP cabinet saw with Delta Unifence and 50 inch rails…....... :-( However, after much research and positive reviews on LJ and other forums, I purchased a Ridgid Model R4511 Hybrid Table Saw in 2009….... :-) I was much impressed by this well engineered tool with so many features offered at such a favorable price, especially with the sale going on at Home Depot at the ti...

Read this entry »


View Paul Stoops's profile

Decked Out Ridgid Model R4511 Table Saw #11: The Final Upgrades

01-01-2012 10:38 PM by Paul Stoops | 3 comments »

This blog chapter discusses the final upgrades I made to my Model R4511 tablesaw. Upgrading the Blade Insert As with most tablesaws, the stock blade insert is a metal die casting with a wide slot to accommodate both vertical and bevel cutting. However, the wide slot does not provide adequate support of the material, particularly when cross cutting. The lack of material support adjacent to the cut is especially noticeable when cross cutting hardwood plywood, which frequently has very thi...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com