PaulHWood's Favorites

  • Advertise with us
View Holbs's profile

Plantation Shutters #9: Wood Finish error. I made booboo. Re-do

05-31-2017 02:44 AM by Holbs | 2 comments »

Poly runs. Ug! Maybe I’m lucky to have found out now on easy wood and such small quantities. Not sure what was different between my window jambs & stool boards to these casing boards. But I have runs on the side. Bad. I had none on the jambs. I can only assume, went too heavy causing running drips. How to fix? I can only guesstimate sand down and re-finish. Again, it’s only the sides. But still… Ug. Bob Flexner’s “Understanding Wood Finishing&#...

Read this entry »

View mafe's profile

How to use a Kerfmaker (trying to help out!) Blog.

09-21-2010 09:14 PM by mafe | 45 comments »

How to use a KerfmakerOk, many asked me this question, and I have seen it again and again on LJ. If you need to find out how to make one, you can see my Kerfmaker 'Brass'n wood'. Another fun gadget is the tenonmarker: I’ll try to explain, as well as I can, feel free to ask questions if I do not make myself clear (I’m only human): Collect what is needed, in this case a base stock and two thinner side stocks, and of course a Kerfmaker...

Read this entry »

View TheHarr's profile

Harry's new router table and fence design #1: Novel approach to make a cutout for your router lift.

05-20-2012 01:51 AM by TheHarr | 6 comments »

I picked up a Jessem FX II router lift a couple of years ago and finally found time to make my 4th router table. This time I took a novel approach to make the cutout using the template as a support frame to increase the thickness of the plywood to 1 1/2”. The 2nd part of this blog illustrates how I made an adjustable fence using 1/2” screws. This is an awesome design that uses epoxy so no welding is needed. My neighbor likes to take pictures for me so instead of writing a no...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics