Bench Re-incarnation

  • Advertise with us
Blog series by Paul updated 03-26-2016 03:09 AM 2 parts 2322 reads 1 comment total

Part 1: Next step

04-08-2016 08:31 PM by Paul | 1 comment »

Scabbed together scraps with pocket screws & 1/2 sheet of 1/4” oak plywood. Min-wax pecan stain and satin poly. More red oak cut-offs from other projects destined for drawer fronts and soft maple cast-off from local cabinet shop destined to be the bench base board. I do love making use of hardwood that often finds it way into a burn pile or land fill! I can’t seem to get the hang of correctly titling and linking the related blog entries though.

Read this entry »

Part 2: Bench Reincarnation

03-26-2016 03:09 AM by Paul | 0 comments »

Well, it’s only been three years – but finally putting together a facade out of oak scraps.

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics