LumberJocks

Biedermeier/30's Dining Room Table

  • Advertise with us
Blog series by Patricelejeune updated 08-05-2014 06:40 PM 4 parts 7477 reads 29 comments total

Part 1: - Shaping and veneering

05-05-2014 05:30 PM by Patricelejeune | 9 comments »

We have been hired to make a dining room table from a 30’s model and slide it on the Biedermeier side. This is not our usual traditional furniture making but it is also a nice change in the usual styles we work on. We started with a simple design to show the overall idea Brick laid apron in pine for a light top Poplar “plaque to glue under the top. it will host a metal plate to bolt the lower part to the top The base is made out of beech, for an heav...

Read this entry »


Part 2: - more veneering and sanding

05-23-2014 05:53 PM by Patricelejeune | 7 comments »

So Patrick did veneer the column.He first put the veneer on an kraft paper to hold the fiber ni place, we were not sure this thick veneer will like the bending. The article can be found there http://www.oldbrownglue.com/articles.html What you see here is were the seem was made, on the overlap, using a veneer saw then using the reversibility of the glue with an iron to finish the glueing. It cleans easily enough with water I have been careful enough to mark where the ring inse...

Read this entry »


Part 3: - Almost done

07-01-2014 05:43 PM by Patricelejeune | 1 comment »

I had some more time to work on my table before to be really interrupted by the parcment job. You can see the post related to the parchment table there Top as been veneered with old brown glue, my favorite liquid hide glue, shaped and sanded and I did straighten the edges for a nice clean fit. I have ben playing with steam bending. Russ Filbeck lent us one of his steamer. I used a PVC pipe to dip my cherry moulding in dyed black water to soak them through ...

Read this entry »


Part 4: - Ready for finish

08-05-2014 06:40 PM by Patricelejeune | 12 comments »

Last time I posted on that project I was steam bending my mouldings. The columned were veneered in a previous post. Since this post we had another job to do a video on veneering column with Liquid Hide Glue that we posted on our Old Brown Glue playlist on youtube. It is uploading at the moment so go see it later if you are interested in learning how to veneer columns, we are pretty proud of it. The columns were turned with groves to allow for black rings. T...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com