Garage Tool Cabinets #5: Tools and stuff in cabinet
This is with all the stuff inside DoubleDD had a good idea to use scraps for the door panels. i will use that idea. sort of a patchwork .
| This blog is written by Parsimonia | 5 entries so far |
Latest Entry
Older Entries
-
Garage Tool Cabinets #4: Final Assembly and Installation
I mounted the cabinets by making a ledger board with a 2×6, and a couple of 2×6s on eac...
-
Garage Tool Cabinets #3: Cabinet Back
Rather than glue up everything at once, which had resulted in glue setting on the first piece bef...
-
Garage Tool Cabinets #2: Cabinet glue up
One carcass is glued up. One block under the lower shelf moved under the clamp slightly. I s...
-
Garage Tool Cabinets #1: Size and Materials Planning
So after making a large workshop upper cabinet, and then a glass door cabinet, I decided to start...
