LumberJocks

Morris style glider #17: Finally finishing!!

  • Advertise with us
Blog entry by Ryan Tanguay posted 03-03-2019 02:16 AM 612 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 16: Glider mechanism Part 17 of Morris style glider series Part 18: Done! »

Whew!
4.5 years since the start and I can finally start to bring out that beautiful wood grain! Have everything sanded to 220 and all the parts that can be disassembled laid out and cleaned off.

Started with all the parts upside down to apply the “under” parts first. Once dry, I will flip over. Rinse, repeat.

I went with danish oil as a finish. I am familiar with it and is hard to mess up. I also wanted to go with a finish that was protective, but didn’t leave the surface feeling like plastic.

Have started to cut out the fabric and the foam for the cushions will be arriving Monday! This is where my wife will step in. She is more experienced with sewing clothing rather than upholstery, but her help will be invaluable. It also makes it a piece that we both had a hand in!



1 comment so far

View htl's profile

htl

4816 posts in 1666 days


#1 posted 03-06-2019 05:00 AM

Nice work and can’t wait to see it on the projects page!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com