LumberJocks

Matt's Favorites

  • Advertise with us
View lobro4's profile

Chaotic Pattern Cutting Board

09-27-2014 01:31 AM by lobro4 | 8 comments »

I have seen some markedly ornate cutting boards here on LJ but this style always intrigued me. I give full credit to MTM Wood for the how to. This Russian fellow has a website where he sells his boards and a YouTube channel that shows how to make many of the fancy styles you see. But unlike him, I do not have a large capacity sliding table saw. Nor do I have a 20” planer. Nor do I have a dual-drum sander. So here’s now I did it with my 13’ Dewalt planer and my 10”...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #2: Zig Zag Cutting Board Patterns - Inspirational

10-05-2010 09:19 PM by McLeanVA | 28 comments »

I was absolutely overwhelmed by the positive response to my Zig Zag How To blog post yesterday, that I decided to brainstorm some possible combinations (on my lunch break) using the basic steps I outlined yesterday. All of the same techniques and steps apply, and really the only difference is the woods and measurements that make up the original “sticks.” Same rules apply to width = height. Length is up to you. Please experiment with whatever measurements and combinations strike...

Read this entry »


View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

08-18-2010 03:03 AM by SPalm | 91 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 68 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View jfk4032's profile

Tumbling block cutting board techniques, lessons learned and tips for cutting and assembly

01-13-2014 02:32 PM by jfk4032 | 13 comments »

After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com