LumberJocks

Nels's Blog

  • Advertise with us
This blog is written by Nels | 4 entries so far

Latest Entry

Plugging large holes

10-13-2015 01:18 PM by Nels | 12 comments »

I have used material that had bolts and washers in it. The holes are 1-3/4” and I need to plug these holes. Cutting the exsisting holes with a router or drill bit is easy. How can I cut a plug accurately that is 2-1/2” in diameter and 1/2” thick? I can make the hole smaller (maybe 2-3/8” or 2-1/4”), but I want to cut out the defects around where the bolt holes are. The material is oak and there are about 200 holes to plug. I guess I could turn the plugs, but that sounds like a lot of work and not all that accurate.

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com