LumberJocks

N1poppy's Favorites

  • Advertise with us
View WoodMosaics's profile

How I Make a Lazy Susan

10-01-2008 05:36 PM by WoodMosaics | 34 comments »

Now before I get started on this little demonstration of how I do it, let me caution you on a couple things. IF you try anything like this, take the plate that your saw blade comes up through and close that hole completely up with a thin piece of wood. Make sure it is even with the top, with no gaps and no lips to catch the pieces. You want it smooth. Then with a “Hollow ground plywood blade” come up from the bottom so you have no gap between the blade and the wood. You may have to do this a ...

Read this entry »


View WoodMosaics's profile

How I Make a Tiny Square Box

03-04-2009 11:12 PM by WoodMosaics | 9 comments »

I will start this blog the same way I started the one on making a Lazy Susan. Now before I get started on this little demonstration of how I do it, let me caution you on a couple things. IF you try anything like this, take the plate that your saw blade comes up through and close that hole completely up with a thin piece of wood. Make sure it is even with the top, with no gaps and no lips to catch the pieces. You want it smooth. Then with a “Hollow ground plywood blade” come up from the bot...

Read this entry »


View Dave Owen's profile

Quilting with Wood

01-23-2010 12:15 AM by Dave Owen | 11 comments »

A friend asked if I could help come up with a good way to create a ‘wooden quilt’ wall hanging about two feet square that his wife wanted for her sewing room. The picture above is one of four identical 3-1/2” square x 1/4” deep patterns that are located near the corners of the larger pattern. While different size members are involved in the larger pattern, the jig I came up with can be used to make the entire quilt pattern. The pattern is quite interesting in...

Read this entry »


View WoodMosaics's profile

Making Wood Quilt Blocks

11-02-2008 08:12 PM by WoodMosaics | 16 comments »

First of all you have to determine what shape you will need that you can make accurately and repeatedly. This is where my jigs come in. I was to poor to buy several miter gauges so I made mine out of angle iron and bar stock. I made them set close to a certain angle, adjustable just a little. This first picture shows the back side of one of my jigs on the saw. This one is set at 45° like 4 of my jigs are; (Now on any of these pictures if you want to see something closer just click on t...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com