LumberJocks

Journey into Woodturning #64: Candle Holder

  • Advertise with us
Blog entry by MovingChips posted 06-29-2021 02:05 PM 997 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 63: Display plate/dome Part 64 of Journey into Woodturning series Part 65: Gray Box Potpourri »

This project really started with the wood. I saw the beautiful figure in the wood of the 4×4 and thought it would make a nice candle holder. So I set out to make it so.

I needed to find out about the size of candles I could use and the size of hurricane glass. I was lucky to find 3inch glass and 2 inch candles. I believed this combo would be good. Since the 4×4 would be cut down beyond 4 inches and I would want a lip or groove for a lip to rest the glass into.

Now that I had the components, it was a matter of shaping the wood. I had a basic image of the shape in my head and an old drawing as reference. As I turned the shape, the cuts and gouges revealed the figure.

In the end, I think this turned out great.

Here’s this weeks video: Candle Holder



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com