LumberJocks

Journey into Woodturning #59: Jewelry Box

  • Advertise with us
Blog entry by MovingChips posted 05-25-2021 02:07 PM 860 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 58: Potpourri Pot Part 59 of Journey into Woodturning series Part 60: Patagonian Rosewood »

This was a request from a friend asking if I could make a jewelry box. The wood was selected, a brief design was sketched, and work completed. I appreciated the challenge and experience taking an outside source design and attempt to match it.

Ribbon Sapele is a beautiful wood and I believe no matter what the project is, it will turn out great. Maple is a fantastic wood to work with, but there is a risk of soft spots. The Black Walnut is a favorite wood to work with, since its fairly soft hardwood and really shines.

I had a build issue, as the top ended up rather large. I was able to remount it and cut the diameter down. I wanted to dish out the top, but became concerned with accidentally popping through and making a funnel.

Here’s this weeks video: Jewelry Box

Thanks



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com