Mitchmor's Forum Topics

  • Advertise with us
View Mitchmor's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (4)buddies (0)favorites (0)activity logWatch
12-25-2014 04:19 AM

About to invest in a Table Saw- how do you see it? - 18 replies

I am pretty green in woodworking and started to walk down the “Which table saw do I buy” yellow brick road. I have learned a ton of stuff here at LJ and felt I needed to post here before I pull the trigger. Any input is greatly appreciated. I’m looking to get the best performing saw for the best value without going too far b...

11-03-2014 08:58 AM

Tips needed on installing/gluing finished inlay. - 3 replies

I’m looking to install a piece of painted/finished wooden inlay into a piece of wood. (To be specific a painted leaf shaped piece of inlay into the center of a board) Any tips out there on preventing (or mitigating) the glue squeeze out and sanding duties/clean up that comes with gluing in finished wooden inlay? (in hopes of the finish ...

03-18-2014 09:48 AM

Can joined wood planks make a sufficent stock? - 7 replies

Hi LJ Community…Joined 1×6 planks for example…Would joined planks hold up as a singular stock that can be cut at will (such as with MDF and ply) ?Of course assuming they were properly planed, glued etc. I ask this mainly terms of a stock for a CNC router. Any tips or insight is appreciated…!

01-16-2014 01:31 PM

What tools do CNC Routers "replace"? - 23 replies

Hi folks, a question If ya don’t mind. For the manufacturing of medium-to-small scale furniture, trims, decorative framing and the like, Do CNC routers replace the need for tools such as: band saw, scroll saw, drill press, conventional and plunge routers, planers…Would a tablesaw and CNC handle all of the above-mentioned producti...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics