LumberJocks

New Vintage 20" BandSaw Project, Rust Removal & Biesemeyer Fence Install

  • Advertise with us
Blog series by MikesProjects updated 06-28-2016 04:48 AM 2 parts 5396 reads 10 comments total

Part 1: rust removal on cast iron top & refurbish action multiple videos

06-28-2016 04:03 AM by MikesProjects | 8 comments »

Video links below… Recently I purchased an older 20” bandsaw. I need a larger bandsaw that can handle anything I throw at it.. I think I found that in a mid 70’s Rockwell 20” wood cutting bandsaw. It probably came out of a school wood shop. The motor is 2hp, it has two speeds which can be adjusted with the belt, it has already been upgraded with carter guides, this big boy saw weighs over 600 lbs. I made several videos regarding this saw which i’ll post below. ...

Read this entry »


Part 2: Restore & Install biesemeyer fence on the BandSaw

06-28-2016 04:48 AM by MikesProjects | 2 comments »

Be sure to check out the first part of this series where I get the saw & refurbish it… The old biesemeyer fence I am using was originally off a powermatic table saw. The shop I got it from had it set up on a saw that was used strictly for running dados. For that they cut the rails short & it only had a 18” rip capacity which worked out great for this bandsaw because I would have felt bad having to cut the rails down my self. I always feel bad modifying old vintage stuff, I...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com