LumberJocks

Mike_190930's Blog

  • Advertise with us
This blog is written by Mike_190930 | 5 entries so far

Latest Entry

Woodsmith CNC Router - Adapting it for Horizontal Milling #1: Milling Tenons

06-10-2021 10:57 PM by Mike_190930 | 0 comments »

Recently I’ve been learning through trial and error, mostly error, to make tenons with compound angles for building chairs. For me at least, this has turned out to be a skill that is not easily acquired. But, as a retired engineer, I retained other skills that have allowed me to sidestep the traditional methods of producing compound angle tenons (and mortices for that matter). Since I have a working CNC, it occurred to me that I could build some adapters for the CNC (described elsewhere in this blog) that reduce the problem to a straightforward engineering task. The goal was to turn the CNC temporarily into a horizontal router table. If you follow Matthias Wandel on Youtube, you ar...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com