LumberJocks

MikeB_UK's Blog

  • Advertise with us
This blog is written by MikeB_UK | 7 entries so far

Latest Entry

Router Plane #2: Spalted Birch Router Plane

04-09-2021 08:02 PM by MikeB_UK | 4 comments »

Going with a traditional hag’s tooth design, so iron is at a high angle, works closer to a scraper than a plane. Just used for the final finish after a chisel. Grab a likely looking chunk of wood, spalted birch in this case.The log behind is elder if this goes wrong :) Clean it up to more or less the right shape. Couple of suspicious looking cracks, so I’ll have to split it off there as well. Work out the angle for the iron, doesn’t need to be too scientific, plough planes have a lot of tolerance for different angles. Drill a pilot hole to get the angle right. Square it up with a chisel, then extend the top to create the wedge angle. Create the wedge from the bit ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com