• Advertise with us
Blog entry by Metrotek posted 03-27-2012 01:07 AM 2365 reads 1 time favorited 1 comment Add to Favorites Watch

Greetings to all once again; I am attaching photos of the clamp for my new Biesmeyer style fence that is under construction. It came out fairly well.
The circular pads are adjustable by carriage bolts threaded in to t-nuts to correct any undesired angularity. The ¾” dowel is a plunger that the cam pushes to lock the fence in place. The two piece pad that the dowel pushes will have an elastomer sandwiched between the pieces to provide a spring action so the cam can over clamp it.
I haven’t installed them yet [because once again I forgot to get enough t-nuts yesterday] but there will be two thread inserts or t-nuts in the wings of the clamp with Allen set screws below the surface of the wings for adjusting both the height and angularity of the clamp and fence. Where the yellow pencil is, is just for graphic depiction of where the ½” shaft goes on which the cam/handle rotates. The fence will be bolted to the clamp with two ⅜” or ½” bolts.
So do you believe it will work?

-- “Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe

1 comment so far

View Roger's profile


21054 posts in 3890 days

#1 posted 03-27-2012 01:02 PM

looks like it will. I think I’d add a little sandpaper so when you lock it down, it won’t have any opportunity to slip

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics