Mean_Dean's Blog

  • Advertise with us
This blog is written by Mean_Dean | 16 entries so far

Latest Entry

M & M Dispenser Friday

12-19-2015 12:06 AM by Mean_Dean | 7 comments »

Ok, made some good progress today! Found some screws the right size, and drilled the holes in the metal lid. Next, put the stop screw into the box (neck), then routed the slot in the bottom of the slider, and fitted both to my satisfaction. Then routed a cove detail on the edges of the top and bottom, using a 3/8” cove bit. I’d rather have used an Ogee bit, but don’t have one! I sanded the top and bottom to 220, including the coves, the endgrain to 400. I forgot to sand the slider, so will do that tomorrow. When that’s done, all parts will be finished sanded! Lastly, sprayed 2 coats (so far) of sanding sealer on the knob, sanding between coats. IR...

Read this entry »

Older Entries

View all 16 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics