LumberJocks

MattinCincy's Favorites

  • Advertise with us
View Div's profile

Building a wooden shoulder plane #3: The mouth. Don't open wide, we are not at the dentist! (sorry Ken)

05-23-2011 10:47 PM by Div | 23 comments »

As I write, my blue Monday is behind me but some of my American friends are still busy dealing with theirs! Let’s get rid of the blues and go back to our project. The glue is dry and we can pop the clamps. I’ve always liked this stage of a project, that moment when you can take off the clamps and clean up the glue lines. Again, a reminder of what we want to achieve: This is where we are. Cut the pins close to the timber and clean up the glue lines. If there is glue squeeze ou...

Read this entry »


View Div's profile

Building a wooden shoulder plane #2: About body parts and even a mouth...

05-21-2011 10:31 PM by Div | 31 comments »

24 hours later and I’m back in my favorite chair! It sounds like some has already sourced plane irons in many different ways. Good! Bertha is ordering a brandnew blade, Derosa found some old plane blades at a local junk store and his Dremel with cutting disc is eager to go! Grittyroots has some old molding planes and wants to use an iron from on of those. Bearpie in Jacksonville has some old worn out metal cutting saw blades about 1/8” thick by 2” wide and 18” long. Good ide...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com