MatthewTruax's Blog

  • Advertise with us
This blog is written by MatthewTruax | 4 entries so far

Latest Entry

Shop Upgrades #2: MFT 3 Powertool Workbench

04-10-2018 01:35 PM by MatthewTruax | 0 comments »

So I have made some progress on the Powertool Workbench. I was lucky enough to score a Woodpeckers Router Table and mounted it flush with the MFT top. As you can see in the attached photos, the top is now extremely heavy and after I took these pictures, I made it a point to revisit the positive stop as it seemed too small for the task. After I took these photos, I heard a loud bang and found that the stop had failed and my gas struts were overextended and ruined. So, like most of you have probably done, I removed the stuff that had failed, closed the top, and left the shop for the weekend. There are now some cracks on the back rear supports as the rail that the top hinges on had be...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics