LumberJocks

MasonJay's Blog

  • Advertise with us
This blog is written by MasonJay | 3 entries so far

Latest Entry

Ladder Shelf #3: Shelf build, assembly, finishing

10-30-2020 02:45 AM by MasonJay | 0 comments »

My final steps were time consuming due to the lack of clamps I have. I got my shelf sides and back pieces glued up and sanded down to 150. Looking back on this process I wish my side and back were square stock and didn’t have the rounded edge, it made some joints look odd. One shelf I had square stock and was able to just route a slight round over profile evenly to them. It is a small detail that my family doesn’t notice but it’s a tip for the future me. All that was left was the final glue up. I laid one frame down on the side and glued/clamped the shelves in place. Then I carefully stood the assembly upright and continued to clamp where I could with what I had. Double checked my fin...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com