LumberJocks

Small Projects #7: Clamp Stand

  • Advertise with us
Blog entry by Madmark2 posted 01-27-2020 09:57 PM 401 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 6: Dog Feeder Part 7 of Small Projects series Part 8: Jatoba and Marble Plant Stand »

A clamp rack was about the first thing I put up. Nine months later I’ve got more clamps and the old rack was overloaded.

I built this rack out of 8’ of 1×4, 8’ of 1×2 and a couple of feet of 2×2.

Completed project

The clamps hang by their handles and the 1×2 acts both as the hanger and end stops for the different clamp lengths. Spring clamps and the smaller clamps are on the sides. The whole thing is on wheels so I can move it around when needed.

Initially I just screwed the feet to the sides but the 4’ lever was too much force. I half lapped the foot into the side and it is much stabler.

Foot detail

-- The hump with the stump and the pump!



1 comment so far

View LittleBlackDuck's profile

LittleBlackDuck

4968 posts in 1621 days


#1 posted 01-27-2020 10:31 PM

You can never have enough clamps… I think clamps should be renamed rabbits...

If you took this picture yesterday, you’ll probably need a bigger stand next week… and if you took the picture last week, you probably already need a bigger stand.

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com