Small Projects #31: Rolling Printer Stand
Most of the “stands” I create are simple 2X4 & ply creations and this is no exception. However this is one is for our home office and needed to be a little less Spartan. Its the exact height of the computer table – and rolls! The printer is an hp all-in-one with scanner and such. Because of this it needs a minimum 18” height when the scan lid is open. I mad the shelf 20” to give some clearance. The raw 2×4s were planed down to 1-1/4 to remove the grade marks and other dings and dents. They were ripped to 3-1/4”, flipped & reripped to 3” even. The sides were routed with a bead to mute the 2×4ness. The bottoms were beve...
