LumberJocks

Lost Wallet

  • Advertise with us
Blog entry by LittleBlackDuck posted 01-19-2021 06:02 AM 792 reads 0 times favorited 20 comments Add to Favorites Watch

Hey rc... and Boys and Girls that got cheesed of with his complaints and actually cared…

Look what I found while surfing LJ…

So quit bitching and go visit Banggood!

I’ll might also try and track down your sander!

-- If your first cut is too short... Take the second cut from the longer end... LBD



20 comments so far

View robscastle's profile

robscastle

7738 posts in 3212 days


#1 posted 01-19-2021 06:58 AM

OMG

I take it your referring to my Coon Cheese?

1. have never actually complained about loosing my wallet but used it to beef up my text verbage and try to add some thing with a little interest to read, and hoping other LJs will go looking around your workshop too, and possibly ignoring all the other rubbish I go troppo about.
2. In fact I saw it as all being a bit of fun and an old 70 yo getting to almost talk to somebody for a change.
3. I don’t really give a you know what aboutiit but I enjoy being able to communicate with like minded people.
4.Yep have seen Banggood…funny people these Chinese!... but if the price is right I will buy. I have no doubt retailers do the same to us anyway and add their markup for AUS customers. So I have no guilt or loss of patriotic belief in AUS made. sorry Dick!
4a. Bloody glasses I hide them everywhere and still cannot find them I need them!

Now the sander.
5. Well without giving too much away,..... Pssst its actually alive and kicking hidden within a blog here somewhere!

6 The care factor …as we have 807 925 members excluding corelz125 I am sure they all care! and hang on every word I present…...well maybe 2 at least!

7 What am I up too well busy helping No 1 So receiving Sur Ron Bikes and getting them shipped out to customers
should be outta here and on the way back home Aus day 26 Jan or very close.

Before the delivery

After the delivery (believe it or not, there is 50x stacked in there somewhere)

next delivery will be 100x plus parts phew e! I hope I don’t kark it working so hard!

-- Regards Rob

View LittleBlackDuck's profile

LittleBlackDuck

6510 posts in 1829 days


#2 posted 01-19-2021 08:54 AM



...have never actually complained about loosing my wallet…
- robscastle

So I have spent the last 12 months of my life under the duress of the pandemic searching for a wallet you don’t give a stuff about… Thanks ”buddy”!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile

robscastle

7738 posts in 3212 days


#3 posted 01-19-2021 12:05 PM

Oh gee sorry I didn’t realise you actually went to so much trouble, I see you had been surfing the internet, but I imagined it was a side issue when you found Banggood looking for other types of bangs, like of course fireworks for Guy fawks Day.
I feel kinda silly now so if you want I could knock you up a Coon Cheese sandwich with your choice of condiments to try and recompense your hard work, I could include a few face masks too if you were running short

-- Regards Rob

View robscastle's profile

robscastle

7738 posts in 3212 days


#4 posted 01-19-2021 06:51 PM

Hey I found some more glasses!

Maybe I may buy yet another pair ?thinking thinking thinking now I reckon you could 3D print me some, wadda ya think Mr Churchil,or is it Sir Mr Churchill !

-- Regards Rob

View LittleBlackDuck's profile

LittleBlackDuck

6510 posts in 1829 days


#5 posted 01-19-2021 10:00 PM



Maybe I may buy yet another pair ?thinking thinking thinking now I reckon you could 3D print me some, wadda ya think Mr Churchil,or is it Sir Mr Churchill !

- robscastle


NOt havoing translucent material, just close your eyes and you’ll be just as well off as if I printed you a pair.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View northwoodsman's profile

northwoodsman

510 posts in 4755 days


#6 posted 01-20-2021 12:16 AM

And how does this pertain to woodworking or contribute to the site?

-- NorthWoodsMan

View LittleBlackDuck's profile

LittleBlackDuck

6510 posts in 1829 days


#7 posted 01-20-2021 12:42 AM


And how does this pertain to woodworking or contribute to the site?

- northwoodsman


The wallet was originally reported as lost in my workshop… and ocassionally I actually do some woodwork in my workshop… other than drink vino.

This was written for the thousands of LJ members that were fretting over rc’s plight over his lost wallet.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View pottz's profile (online now)

pottz

14798 posts in 1993 days


#8 posted 01-20-2021 01:46 AM



And how does this pertain to woodworking or contribute to the site?

- northwoodsman


nothing thats what they do best,ya had too be around since this joke started a couple years ago.kinda goes hand in hand with the pinched sander also.NWM you sure you wanna get in on this? ;-)

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View northwoodsman's profile

northwoodsman

510 posts in 4755 days


#9 posted 01-20-2021 02:23 AM

I was just curious. I guess I have a lot of catching up to do. I knew that there had to be more to the story. Was the wallet ever found?

-- NorthWoodsMan

View pottz's profile (online now)

pottz

14798 posts in 1993 days


#10 posted 01-20-2021 03:06 AM



I was just curious. I guess I have a lot of catching up to do. I knew that there had to be more to the story. Was the wallet ever found?

- northwoodsman


first it must be determined if there ever was a wallet?

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View LittleBlackDuck's profile

LittleBlackDuck

6510 posts in 1829 days


#11 posted 01-20-2021 03:52 AM


first it must be determined if there ever was a wallet?

- pottz


Has to be one… anyone with shifty eyes like rc could not possibly lie… all his parole officer(sssss) confirmed that.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View pottz's profile (online now)

pottz

14798 posts in 1993 days


#12 posted 01-20-2021 07:08 PM


first it must be determined if there ever was a wallet?

- pottz

Has to be one… anyone with shifty eyes like rc could not possibly lie… all his parole officer(sssss) confirmed that.

- LittleBlackDuck


hey ive never trusted him (wink)

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View robscastle's profile

robscastle

7738 posts in 3212 days


#13 posted 01-21-2021 02:38 AM

well I am 100% ....just like a bottle of Chivas Regal

-- Regards Rob

View robscastle's profile

robscastle

7738 posts in 3212 days


#14 posted 01-21-2021 02:39 AM

you guys a so mean to me I might just stop posting rubbish you know.

-- Regards Rob

View robscastle's profile

robscastle

7738 posts in 3212 days


#15 posted 01-21-2021 02:40 AM

I wonder when I Kark it could you ask Cricket to post me to In Memoriam as a 1 off

-- Regards Rob

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com