LumberJocks

Workshop Evolution (few more pictures)

  • Advertise with us
Blog entry by LittleBlackDuck posted 07-26-2020 05:13 AM 517 reads 0 times favorited 13 comments Add to Favorites Watch

Boys and Girls,

I strung together a swag of extra photos of my workshop (equipment and jigs)

after going apeshit with the camera. The purpose was to,
  1. Supplement the collage I made a few years ago (2016). I apologise for duplicates but include them on the basis that some of the original photos may have faded since.
  2. Show friends that can’t visit at the moment because of C-19, the current workshop evolution.
  3. Insurance purposes (content proof as we all tend to underquote to appease SWMBO).
  4. Update my LJ Workshop after several (one) PM requests.
  5. Remind me of what I already have, in order to,
    • Stop buying duplicates.
    • Remember the multiple ways/tools I can/have to do a job.
    • Hint to where I can find it.

The photos are in no particular order, though I have tried to keep like topics grouped… though after a quick glance, I failed miserably.

Primarily the tools are just sitting there bone idle and not earning their keep at the time of photography. So, if some pictures look blurred, it’s only accumulation of sawdust (mixed with bull). Some “action” photos from the past may be included to supplement the bullshit I was spinning for the topic.

While no people or animals were hurt in amassing this load of memorabilia, you are warned that tools can be dangerous with great damage potential from metal on flesh. I accept no responsibility/liability if you think any of my ideas are not stupid and inadvertently cause you harm through your own malpractice and sharing of my penchant for vino.

If you feel bored during lockdown (current or future), looking at workshop photos may be a tad more wholesome than dressing down, masking up and going rioting.

Hopefully, no sideways photos will be encountered.

-- If your first cut is too short... Take the second cut from the longer end... LBD



13 comments so far

View crowie's profile

crowie

3802 posts in 2750 days


#1 posted 07-26-2020 06:40 AM

My goodness me Alex, I hope you have Fort Knox security on your shed sir…..

OR one great big mean “D 4 alarm”

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View robscastle's profile

robscastle

7237 posts in 3003 days


#2 posted 07-26-2020 07:07 AM

Yeah bloody annoying to say the least
1. Where is slide show button so I can actually see something!
2. I have duplicated a lot of my tools due to Time lost looking for a particular piece of kit.
3. Unless I actually fall over something these days that I am looking for it rarely ever gets found
4. Its been raining here a bit this week so I took the Ute out and managed to do a few almost frightening sideways moves (brought back memories) !! I tell you
5. I have been watching the NEWS and hearing about you guys an your BLM attitude to complying with Corona virus requirements, this needs to stop as I have some interstate travel coming up and I don’t want to be bailed up again at the borders again because you bloody cockroaches will not conform.
If need be I well send my mate from Glen rowan to pay a visit if you keep it up!

Anyway “Have a Winfield” and get the slide show button working please so I can see all your nice pickies!!

-- Regards Rob

View Dutchy's profile

Dutchy

3774 posts in 2968 days


#3 posted 07-26-2020 07:50 AM

I have seen the PDF, man o man,.

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

4966 posts in 1620 days


#4 posted 07-26-2020 08:29 AM


Yeah bloody annoying to say the least
1. Where is slide show button so I can actually see something!
2. I have duplicated a lot of my tools due to Time lost looking for a particular piece of kit.
3. Unless I actually fall over something these days that I am looking for it rarely ever gets found
4. Its been raining here a bit this week so I took the Ute out and managed to do a few almost frightening sideways moves (brought back memories) !! I tell you
5. I have been watching the NEWS and hearing about you guys an your BLM attitude to complying with Corona virus requirements, this needs to stop as I have some interstate travel coming up and I don t want to be bailed up again at the borders again because you bloody cockroaches will not conform.
If need be I well send my mate from Glen rowan to pay a visit if you keep it up!

Anyway “Have a Winfield” and get the slide show button working please so I can see all your nice pickies!!

- robscastle


Do you want me to chew your poridge for you as well… I’ll take my teeth out so you don’t get infected.
You’ll just have to move your hand to the new position to be able to press the slideshow button yourself.

Yeah, the idiots here in VIC… I have just renounced my religion and become a Hungarian again. The fools just don’t realise that no matter how much they protest and rebel here in Victoria, other states won’t let them escape the border.
But then again our cops are piss weak… don’t they realise they have a bloody gun at their side… with bullets itching to be let loose.
Personally I can foresee the next Victorian homicide will be by a vigilante who’s lost a loved one… Hell we have enough multi cultural residents that actually respect their elders, especially their parents.

And I will have one, Tony!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile

robscastle

7237 posts in 3003 days


#5 posted 07-26-2020 11:35 AM

Looks like you do with a visit to the Barber too !

-- Regards Rob

View GR8HUNTER's profile

GR8HUNTER

7643 posts in 1512 days


#6 posted 07-26-2020 02:52 PM

I am so confused right now where is the video :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View LittleBlackDuck's profile

LittleBlackDuck

4966 posts in 1620 days


#7 posted 07-26-2020 08:56 PM



Looks like you do with a visit to the Barber too !
- robscastle

I am so confused right now where is the video :<))
- GR8HUNTER


Sorry GR8 but I couldn’t handle any more abuse about my hair… and as I get a #3 buzz, I can only assume rc refers to me wearing the night shirt in the mower video.

rc touché… took me a Century before it dawned on me (remembered the $64+ question as I was drafting the above line)... initially had me going as I though I hid my face (head) well enough to bypass the cops.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View pottz's profile

pottz

10243 posts in 1783 days


#8 posted 07-27-2020 07:46 PM

well im kinda dizzy now after that shop tour,hell my shop looks empty compared to your shrine to the tool gods.well i guess ill go mortgage the house so i can try and keep up with you,might have to sell swmbo’s car i dont think the value of the house will get me near your level of tool madness.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View LittleBlackDuck's profile

LittleBlackDuck

4966 posts in 1620 days


#9 posted 07-27-2020 11:09 PM


... might have to sell swmbo s car…
- pottz

Nothing that drastic… Just get her a couple of part time jobs… part time, so she can still cook dinner and pour you a vino…

hell, With my attitude, I still don’t know why my wife(s) left me.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile

robscastle

7237 posts in 3003 days


#10 posted 07-28-2020 10:11 PM

Good to see we are not effected by senility yet!

and the sale is off for the time being

wait …what video?

Oh wait there is more tee hee (swmbos car)

Possibly see it as its next life in the middle east as a taxi !

-- Regards Rob

View LittleBlackDuck's profile

LittleBlackDuck

4966 posts in 1620 days


#11 posted 07-28-2020 10:55 PM



... wait …what video?...
- robscastle

Sorry rc models for the video were stopped by the isolation police at my front door for insufficient “protective” gear.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile

robscastle

7237 posts in 3003 days


#12 posted 07-29-2020 06:59 AM

Hey! check this out!

Funny stuff I wonder will we get a Ted’s removals as well!

That we could do with for sure. Plus a Sideways Removals too, it wouldn’t go a stray !

Too many cars in my street already might have to make the call!!

When is the next snapper parade?

-- Regards Rob

View LittleBlackDuck's profile

LittleBlackDuck

4966 posts in 1620 days


#13 posted 07-29-2020 08:34 AM

Not driving my 4WD to your street, just to get it pinched… border closures ya know!

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com